Booth WalkthroughSolis Showcases Modular String, Hybrid and C&I Storage Line at Solar Solutions Düsseldorf 2025
René Gelfert, Product Solutions Specialist at Solis, walks through the company's booth at Solar Solutions Düsseldorf 2025, covering the residential and commercial inverter range plus the newly integrated battery cabinets. Gelfert describes Solis as the world's third-largest inverter manufacturer; the lineup centers on flexible MPP configurations and preassembled C&I storage.
Booth WalkthroughSolar Solutions Düsseldorf 2025 · Düsseldorf
05:01
Filmed on site · No editorial direction beyond question set · Captions auto-generated, reviewed by EUPD Research
String Inverter Range: From Balcony to 200 kW Arrays
Solis displayed three string inverters spanning its residential-to-commercial range. According to René Gelfert, Product Solutions Specialist at Solis, the Ultra Mini 0.8 kW targets balcony or small garage systems with two to three panels, while the 40-60 kW unit adds five MPP trackers with dual input for handling larger string counts.
At the top end sits the 150 kW inverter with 21 inputs. Gelfert said installers can oversize PV up to 200 kW behind a single unit, part of a portfolio built for both classic PV and hybrid applications across project sizes.
"Here, too, you can oversize the PV system; you can handle up to 200 kW of PV with a single inverter."
Gelfert · · 01:22
Residential Hybrid: Backup Built In, No Extra Boxes
The 5-12 kW three-phase hybrid, part of a range extending to 125 kW AC nominal output, is particularly popular in the DACH region, according to Gelfert. It ships with four MPP trackers starting at 8 kW, giving installers design flexibility even on smaller residential systems.
Backup capability comes fully integrated in every Solis hybrid, Gelfert said, so no additional transfer switch box is required for installation. He called it an all-in device that cuts down on-site complexity for installers deploying backup-ready residential systems.
"The backup capability is fully integrated into every Solis Hybrid. You don't need to install any additional transfer boxes."
Gelfert · · 01:56
C&I Storage: Preassembled Cabinets and Multi-Mode Operation
Solis paired its 50 kW C&I hybrid, part of a 29.9-60 kW family for high-voltage batteries, with a 100 kWh battery cabinet. Gelfert explained the system arrives preassembled: cabling connected, battery packs installed, and the communication box in place, leaving installers to position the cabinet and attach the inverter.
For larger projects, Solis showed an 80/100/125 kW hybrid paired with a 261 kWh battery. Gelfert said the unit runs as PV-only, hybrid with battery, or AC-coupled battery inverter, and accepts generator input for backup. It carries 10 independent MPP trackers, double-input for up to 20 strings, and is black-start capable.
"You basically don't have to install anything else from the battery. You just set it up, connect the inverter, and the system is ready to go."
Gelfert · · 02:57
Chapters
Chapters · click to jump00:00Introduction
Gelfert introduces Solis as the world's third-largest inverter manufacturer and previews the booth.
00:40String Inverter Lineup
Gelfert presents three string inverters from 0.8 kW to 150 kW, with oversizing options up to 200 kW.
01:30Residential Hybrid Family
Gelfert highlights the 5-12 kW hybrid, with integrated backup and four MPP trackers, for residential use.
02:10C&I Hybrid with Preassembled Battery Cabinet
A 50 kW hybrid paired with a 100 kWh battery cabinet demonstrates factory-preassembled storage.
03:20Large C&I Hybrid and 261 kWh Storage
Gelfert shows the 80-125 kW hybrid, with 10 MPP trackers and black-start capability, alongside a 261 kWh battery.
04:24Closing Remarks
Gelfert points viewers to the Solis website and webinars for the full portfolio.
Interview transcript
Auto-generated · reviewed · ~3 min readSolar Solution Düsseldorf 2025, mein Name ist René Gelfard, ich bin Product Solution Specialist bei der Firma Solis. Wir sind weltweit trittgrößter Inverterhersteller. Ich möchte euch gerne mitnehmen auf unserem Messestand und euch die neuesten Innovationen zeigen, die Solis mitgebracht hat. Kommt mit! Hier möchte ich euch nun eine kleine Auswahl an PV-Wechselrichtern zeigen. Solis hat ein sehr üppiges Portfolio für Hybrid, aber auch für klassische PV-Wechselrichter. Hier haben wir drei Produkte ausgestellt. Die Range ist hier der Ultra Mini 0,8 kW, also die klassische kleinste Anlage, Balkonanlage oder kleiner Garagenanlage mit zwei drei Panels. Über der nächsten neuen Innovation, die wir zeigen, das ist der 40 bis 60 kW der kommt mit fünf MPP-Trackern Doppeleingang, also ihr könnt hier auch üppige Strings verarbeiten. Oder hier die größte Maschine, Solis aktuell im Portfolio hat für String-Inverter, das ist der 150 kW der kommt mit bis zu 21 Strings bzw. mit 21 Eingängen. Also auch hier könnt ihr die PV-Anlage überdimensionieren, ihr könnt bis zu 200 kW PV verarbeiten mit einem Wechselrichter. Kommen wir hier mit diesem Produkt zu den Hybrids, die Solis anbietet. Solis hat ein sehr üppiges Portfolio an Hybrid-Invertern. Die Range dreiphasig, reicht hier von 5 kW bis hoch zu 125 kW AC Nennleistung. Das ist unser Produkt, was in der Dachregion sehr beliebt ist. Es ist der 5 bis 12 kW Hybrid, der kommt bereits ab 8 kW mit vier MPP-Trackern. Das heißt, ihr habt auch hier bei kleineren Anlagen schon die Möglichkeit, euer System zu designen. Die Backup-Fähigkeit ist in jedem Solis Hybrid voll integriert. Ihr braucht keine zusätzlichen Umschaltboxen installieren. Es ist wirklich all-in, ein tolles Gerät. Gehen wir rüber zu unseren größeren Hybrids, denn die sind auch sehr interessant. Nachdem ich euch Lösungen für Residential Hybrid gezeigt habe, möchte ich hier über etwas ganz spannendes sprechen. Das ist die C&I Hybrid-Lösung von Solis. Das heißt wir sehen hier ein 50 kW Hybrid-Wechselrichter. Diese Gerätefamilie kommt in den Leistungsklassen 29,9 bis 60 kW und sind für High Voltage Batterien geeignet. Wie ihr seht, dieser Wechselrichter ist an einer Kabinettlösung angebracht. Das ist super spannend. Ich öffne das Ganze mal hier. Das ist ein Storage-System für C&I von Solis. Das heißt, Solis kommt mit einer eigenen Batterie in den Markt und die passt natürlich perfekt zum eigenen Wechselrichter. Installatörer können sich das System bestellen. kommt perfekt vorbereitet auf die Baustelle. Alles ist vormontiert, die Kabel sind verbunden, die Battery-Packs sind alle vorinstalliert. Die Kommunikationsbox ist da. Ihr müsst quasi nichts mehr installieren von der Batterie. Ihr stellt euch das Ding hin, hängt den Wechselrichter dran und das System kann laufen. Diese Lösung die wir hier sehen, sind 50 kW Wechselrichter und 100 Kilowattstunden Batterie. Wir bauen das 261 Kilowattstunden Batterie mit einem größeren Hybrid und den zeige ich euch jetzt hier Drüben. Wie gerade erwähnt, haben wir natürlich auch noch einen ganz großen Hybrid. Also hier seht ihr einen Hybrid-Emwörter in den Leistungsklassen 80k, 100k, 125k. Das ist eine sehr potente Maschine für C&I-Speicheranwendung. Das Gerät kann als reiner PV-Wechselrichter betrieben werden, als Hybrid mit Batterie, als Batterie-Wechselrichter für AC-Coupled-Batterien. Ihr könnt Generatoren anschließen für Notstromversorgung. Das Gerät ist voll backupfähig. ist schwarbstattfähig, wie man so schön sagt. Die PV-Leistung könnt ihr auf bis zu 10 MPPs einfangen. Das heißt, das Gerät kommt mit 10 MPP-Trackern alle unabhängig voneinander. Doppelbelegt, also ihr könnt bis zu 20 Strings verarbeiten. Mit dieser Lösung gibt euch Solis so viel Flexibilität. Das denke ich, passt für fast alle C&I-Projekte oder wahrscheinlich alle. Schaut euch die Information auf den Homepages an, besucht unsere Webinare. Wir haben noch sehr viele Informationen zu diesem Produkt, wie auch die Solis Cloud und die Solis AI. spielt alles im Hintergrund in Reihen. Damit habt ihr eine sehr flexible Lösung für euer C&I-System und ich denke, es passt eigentlich in alle Projekte. Ich hoffe ich konnte euch einen guten Überblick geben über die Produkte, wir auf der Solis Solution zeigen. Ansonsten Solis ist ein riesen Portfolioanbieter. Wir haben noch deutlich mehr. Checkt einfach unsere Homepage. Da seht ihr alle Produkte und alle Informationen dazu. Ich freue mich auf ein Wiedersehen auf einer Messe oder auf Kundentermin. Also bis bald. Ciao.
Show full transcript
Frequently asked questions
What is the smallest inverter Solis showed at the booth?
The Ultra Mini 0.8 kW, aimed at balcony systems or small garage installations with two to three panels.
How large a PV array can the 150 kW string inverter handle?
According to Gelfert, it has 21 inputs and can handle up to 200 kW of oversized PV behind a single unit.
Does the residential hybrid need a separate backup transfer switch?
No. Gelfert said backup capability is fully integrated into every Solis hybrid, eliminating the need for an additional transfer switch box.
What comes preassembled in the C&I battery cabinet?
Gelfert described cabling already connected, battery packs preinstalled, and the communication box in place, so installers mainly position the cabinet and connect the inverter.
Can the large hybrid inverter run without PV or battery?
Yes. Gelfert noted it operates as a pure PV inverter, as a hybrid with battery, or as an AC-coupled battery inverter, and it accepts generator input for backup.
How many MPP trackers does the largest hybrid support?
It has 10 independent MPP trackers with double input, allowing up to 20 strings, per Gelfert.